Faculty

Lin, Jui-Che 林睿哲 (Professor)

Contact：

Phone：+886-6-2757575 ext 62665
Fax：+886-6-2344496
Email：jclin@mail.ncku.edu.tw

NCKU Research: https://researchoutput.ncku.edu.tw/en/persons/jui-che-lin

Personal CV ：

Education

PhD University of Wisconsin-Madison, 1994
BS National Cheng Kung University, 1987

Experience

  • Professor, Dept. of Chemical Engineering, National Cheng Kung University (20010801 - 0)
  • Director, Center for Occupational Safety and Health and Environmental Protection, National Cheng Kung University (20170801 - 20190131)
  • Chairman, Dept. of Chemical Engineering, National Cheng Kung University (20140801 - 20170731)
  • Adjunct Professor, School of Dentistry and Institute of Oral Medicine, National Cheng Kung University (20070801 - 0)
  • Associate Professor, Dept. of Chemical Engineering, National Cheng Kung University (19940801 - 20010731)

Research Expertise

Biomaterials, Biomedical Engineering, Surface Modifcation

Teaching

  • Spring Semester, Academic Year 2021, Introduction to Engineering, General Education Center
  • Spring Semester, Academic Year 2021, Introduction to Engineering, General Education Center
  • Spring Semester, Academic Year 2021, Introduction to Biological Materials, Graduate School of Dept. of Chemical Engineering
  • Spring Semester, Academic Year 2021, Introduction to Biomedical Engineeering, Junior and Senior Course, Dept. of Chemical Engineering
  • Spring Semester, Academic Year 2021, Mass and Energy Balance, Freshman Course, Dept. of Chemical Engineering

Publications

  1. Shu Ye, Shu-Fen Chuang, Sheng-Shu Hou, Jui-Che Lin, Li-Li Kang, Yung-Tsung Chen, “Interaction of silane with 10-MDP on affecting surface chemistry and resin bonding of zirconia”, Dental Materials, 2022 38(4), 715-24 (https://doi.org/10.1016/j.dental.2022.02.014) (April 2022)

  2. Shu Ye, Jui-Che Lin, Li-Li Kang, Chia-Ling Li, Sheng-Shu Hou, Tsung-Lin Lee, Shu-Fen Chuang, “Investigations of silane-MDP interaction in universal adhesives: A ToF-SIMS analysis”, Dental Materials, 2022 38(1), 183-193 (https://doi.org/10.1016/j.dental.2021.12.002) (January 2022)

  3. Shu-Fen Chuang, Chu-Chun Liao, Jui-Che Lin, Yu-Cheng Chou, Tsung-Lin Lee, Ting-Wen Lai. “Polymerization of dental composites using near-infrared upconversion luminescence”, Polymers 2021  13(24), 4304 https://doi.org/10.3390/polym13244304 (Dec 2021)

  4. Chi-Hui Cheng, Han-Cheng Liu, Jui-Che Lin, “Surface Modification of Polyurethane Membrane with Various Hydrophilic Monomers and N-halamine: Surface Characterization and Antimicrobial Properties Evaluation”. Polymers 2021, 13(14), 2321. https://doi.org/10.3390/polym13142321 (July, 2021)

  5. Po-An Lin, Chi-Hui Cheng, Kun-Ting Hsieh, Jui-Che Lin, “Effect of alkyl chain length and fluorine content on the surface characteristics and antibacterial activity of surfaces grafted with brushes containing quaternized ammonium and fluoro-containing monomers”. Colloids and Surfaces B: Biointerfaces 2021, 202, 111674, (June, 2021)

  6. Shen-Jui Tseng, Chi-Hui Cheng, Tzer-Min Lee, and Jui-Che Lin, “Studies of osteoblast-like MG-63 cellular proliferation and differentiation with cyclic stretching cell culture system on biomimetic hydrophilic layers modified polydimethylsiloxane substrate”. Biochemical Engineering Journal 2021, 168, 107946 (April, 2021)

  7. Bin-Hong Tsai, Tse-An Lin, Chi-Hui Cheng, and Jui-Che Lin, “Studies of the Sulfonated Hydrogenated Styrene–Isoprene–Styrene Block Copolymer and Its Surface Properties, Cytotoxicity, and Platelet-Contacting Characteristics”. Polymers  2021, 13(2), 235; https://doi.org/10.3390/polym13020235  (Jan, 2021)

  8. Shen-Jui Tseng, Chia-Ching Wu, Chi-Hui Cheng, Jui-Che Lin, “Studies of surface grafted collagen and transforming growth factor β1 combined with cyclic stretching as a dual chemical and physical stimuli approach for rat adipose-derived stem cells (rADSCs) chondrogenesis differentiation”. Journal of the Mechanical Behavior of Biomedical Materials 2020, 112, 104062 (December, 2020) (DOI: 10.1016/j.jmbbm.2020.104062)

  9. Chi-Hui Cheng, Guan-Fu Chen, Jui-Che Lin, “Studies of zwitterionic sulfobetaine functionalized polypropylene surface with or without polyethylene glycol spacer: surface characterization, antibacterial adhesion, and platelet compatibility evaluation”. Journal of Biomaterials Science Polymer Edition 2020, 31(16), 2060-2077 (November, 2020) (https://doi.org/10.1080/09205063.2020.1793707)

  10. Bin-Hong Tsai, Yong-Han Chuang, Chi-Hui Cheng, and Jui-Che Lin, “Sulfonation and characterization of tert-butyl styrene/styrene/isoprene copolymer and polypropylene blends for blood compatibility applications”. Polymers  2020, 12(6), 1351; doi:10.3390/polym12061351  (June, 2020)

  11. Shen-Jui Tseng, Shih-Ting Huang, Chia-Ching Wu, Chi-Hui Cheng, Jui-Che Lin, “Studies of proliferation and chondrogenic differentiation of rat adipose stem cells using an anti-oxidative polyurethane scaffold combined with cyclic compression culture”. Materials Science and Engineering C 2020, 112, 110964 (July, 2020) (DOI: 10.1016/j.msec.2020.110964)

  12. Chia-Sheng Hung, Kun-Ting Hsieh, Chi-Hui Cheng, Jui-Che Lin, “Studies of polypropylene surface modified with novel beta-thiopropionate-based zwitterionic polymeric brush: synthesis, surface characterization, and significantly reduced fouling characteristics evaluation”. Journal of Biomaterials Science Polymer Edition 31(3) 310-23 (Feb 2020) (https://doi.org/10.1080/09205063.2019.1692632)

  13. Hsiu-Wen Chien, Ying-Yuan Chen, Yen-Lun Chen, Chi-Hui Cheng, Jui-Che Lin, “Studies of PET nonwovens modified by novel antimicrobials configured with both N-halamine and dual quaternary ammonium with different alkyl chain length”, RSC Advances 9(13): 7257-65 (March 2019) (https://doi.org/10.1039/C9RA00094A)

  14. Sophia Chao-Wei Huang#, Chi-Hui Cheng#, Yun Chiu, Yi-Ching Lin, Jui-Che Lin, “A facile novel fluorocarbon copolymer solution coating process for improving platelet compatibility of titanium”, Materials Science and Engineering C 80:584-93 (August 2017)

  15. Shu-Fen Chuang, Li-Li Kang, Yi-Chuan Liu, Jui-Che Lin, Ching-Cheng Wang, Hui-Min Cheng, Cheng-Kun Tai, “Effects of silane- and MDP-based primers application orders on zirconia–resin adhesion—A ToF-SIMS study”, Dental Materials 33(8): 923-33 (August 2017)

  16. Yen-Hsuan Chen, Chi-Hui Cheng, Wan-Ju Chang, Yi-Ching Lin, Feng-Huei Lin, Jui-Che Lin, “Studies of magnetic alginate-based electrospun matrices crosslinked with different methods for potential hyperthermia treatment”, Materials Science and Engineering C, 62: 338-49 (2016) (doi: 10.1016/j.msec.2016.01.070) (May , 2016)

  17. CH Cheng, YS Lee, CJ Chang, JC Lin, TY Lin Genetic Polymorphisms in Inflammasome-Dependent Innate Immunity among Pediatric Patients with Severe Renal Parenchymal Infections. PLoS ONE 10(10): e0140128. doi:10.1371/journal.pone.0140128. Epub 2015 Oct 7

  18. Ching-Hsiung Shen, Yu-Jen Cho, Yi-Ching Lin, Li-Chin Chien, Tzer-Min Lee, Wen-Hsi Chuang, Jui-Che Lin, “Surface modification of titanium substrate with a novel covalently-bound copolymer thin film for improving its platelet compatibility”, Journal of Materials Science: Materials in Medicine, 26(2): 79 (Feb 2015)

  19. Shan-hui Hsu, Kun-Che Hung, Ying-Yi Lin, Chiu-Hun Su, Hsi-Yi Yeh, U-Ser Jeng, Chun-Yi Lu, Shenghong A. Dai, Wei-En Fu and Jui-Che Lin, “Water-based synthesis and processing of novel biodegradable elastomers for medical applications”. Journal of Materials Chemistry B, 2(31): 5083-92 (August 21, 2014)

  20. Yung-Show Chiang, Yuh-Ling Chen, Shu-Fen Chuang, Ching-Ming Wu, Pal-Jen Wei, Chang-Fu Han, Jui-Che Lin, Hsiao-Tzu Chang, “Riboflavin-ultraviolet-A-induced collagen cross-linking treatments in improving dentin bonding”, Dental Materials, 29(6): 682-92 (June, 2013)

  21. Ta-Chun Lin, Feng-Huei Lin, Jui-Che Lin, “In vitro characterization of magnetic electrospun iminodiacetic acid grafted chitosan nanofiber composite for hyperthermic tumor cell treatment”, Journal of Biomaterials Science-Polymer Edition, 24(9): 1152-63 (June, 2013)

  22. Ching-Hsiung Shen, Jui-Che Lin, “Solvent and concentration effects on the surface characteristics and platelet compatibility of zwitterionic sulfobetaine-terminated self-assembled monolayers” , Colloids and Surfaces B, 101: 376-83 (Jan, 2013)

  23. Ta-Chun Lin, Feng-Huei Lin, Jui-Che Lin, “In vitro feasibility characterization of magnetic electrospun chitosan nanofiber composite for hyperthermia treatment on tumor cells”, Acta Biomaterilia 8(7): 2704-11 (July, 2012)

  24. Ching-Hsiung Shen, Jui-Che Lin, “Platelet compatibility improvement by proper choice of acidic terminal functionality for the mixed-charge self-assembled monolayers” Langmuir, 28(1): 640-7 (Jan 10, 2012)

  25. Hsi-Yi Yeh, Jui-Che Lin, “Surface Phosphorylation for Polyelectrolyte Complex of Chitosan and Its Sulfonated Derivative: Surface Analysis, Blood Compatibility and Adipose Derived Stem Cell Contact Properties”, Journal of Biomaterials Science-Polymer Edition, 23: 233-250 (Jan, 2012) 

  26. Ching-Hsiung Shen, Jui-Che Lin, “Improving the Surface Biocompatibility with the Use of Mixed Zwitterionic Self-Assembled Monolayers Prepared by a Proper Solvent” Langmuir, 27: 7091-7098 (June 7, 2011)

  27. Rex C-C. Wang, Ming-Che Hsieh, Shih-Ping Yang, Po-Kai Chuang, Jui-Che Lin, Tzer-Min Lee, “Characteristics and cyto-compatibility of collagen/Ca-P coatings on Ti6Al4V substrate”, Surface and Coatings Technology 205: 4683-4689 (June 25, 2011)

  28. Ching-Hsiung Shen, Jui-Che Lin, “Surface Characterization and Platelet Compatibility Evaluation of Binary Mixed Self-Assembled Monolayers Containing Novel Sulfonic Acid Terminated Alkanethiol”, Colloids and Surfaces B, 79:156-163 (August 1, 2010)

  29.  Yu-Chun Wu, Tzer-Min Lee, Jui-Che Lin, Shyh-Yu Shaw, Chyun-Yu Yang, “Argon-Plasma-Treated Chitosan: Surface Characterization and Initial Attachment of Osteoblasts”, Journal of Biomaterials Science-Polymer Edition, 21: 563-579 (April, 2010)

  30. Kuo-Yu Chen, Yu-Sheng Lin, Chun-Hsu Yao, Ming-Hsien Li, Jui-Che Lin, “Synthesis and Characterization of Poly (vinyl alcohol) Membranes with Quaternary Ammonium Groups for Wound Dressing”, Journal of Biomaterials Science-Polymer Edition, 21: 429-443 (March, 2010)

  31. Hsi-Yi Yeh, Jui-Che Lin, “Bioactivity and Platelet Adhesion Study for the Human Thrombomodulin-Immobilized Nitinol Surface”, Journal of Biomaterials Science-Polymer Edition, 20: 807-819 (2009)

  32. Yan-Min Chen, Tsair-Fuh Lin, Chih Huang, and Jui-Che Lin, “Cometabolic Degradation Kinetics of TCE and Phenol by Pseudomonas putida”, Chemosphere, 72, 1671-1680 (2008)

  33. Feng-Ming Hsieh, Chih Huang, Tsair-Fuh Lin, Yan-Min Chen, Jui-Che Lin, “Study of Sodium Tripolyphosphate-crosslinked Chitosan Beads Entrapped with Pseudomonas putida for Phenol Degradation”, Process Biochemistry, 43, 83-92 (2008)

  34. Hsi-Yi Yeh, Jui-Che Lin, “Surface Characterization and In Vitro Platelet Compatibility Study of Surface Sulfonated Chitosan Membrane with Amino Group Protection-deprotection Strategy”, Journal of Biomaterials Science-Polymer Edition, 19, 291-310 (2008)

  35. Yan-Min Chen, Tsair-Fuh Lin, Chih Huang, Jui-Che Lin and Feng-Ming Hsieh, “Degradation of Phenol and TCE Using Suspended and Chitosan-Bead Immobilized Pseudomonas putida”, Journal of Hazardous Materials, 148, 660-670 (2007)

  36. Meng-Yen Tsai, Yu-Ting Sun and Jui-Che Lin, “Surface Characterization and Platelet Compatibility Evaluation of the Binary Mixed Self-Assembled Monolayers”, Journal of Colloid and Interface Science, 308, 474-484 (2007)

  37. Chia-Wen Lin, Li-Jing Chen, Pei-Ling Lee, Chih-I Lee, Jui-Che Lin, Jeng-Jiann Chiu, “The Inhibition of TNF-a-induced E-selectin Expression in Endothelial Cells via the JNK/NF-kB Pathways by Highly N-acetylated Chitooligosaccharides”, Biomaterials, 28, 1355-1366 (2007)

  38. Wen-Hsi Chuang, Jui-Che Lin, “Surface Characterization and Platelet Adhesion Studies for the Mixed Self-Assembled Monolayers with Amine and Carboxylic Acid Terminated Functionalities”, Journal of Biomedical Materials Research, 82A, 820-830 (2007)

  39. Chun-Yu Lin, Yean-Kuen Fang, Che-Hao Kuo, Shih-Fang Chen , Chun-Sheng Lin, Tse-Heng Chou, Yu-Hua Lee, Jui-Che Lin, Sheng-Beng Hwang. “Design and Fabrication of a TiO2/Nano-Silicon Composite Visible Light”, Applied Surface Science, 253, 898-903 (2006)

  40. Bin-Hong Tsai, Chih-Hsiu Lin, Jui-Che Lin, “Synthesis and Property Evaluations of Photocrosslinkable Chitosan Derivative and Its Photocopolymerization with Poly(ethylene glycol)”, Journal of Applied Polymer Science, 100, 1794-1801 (2006)

  41. Chih-Hsiu Lin, Jui-Che Lin, Chiung-Yu Chen, Chu-Yuan Cheng, Xi-Zhang Lin, Jiunn-Jong Wu, “The Feasibility Evaluation of Chitosan Coating on Polyethylene Tubing for Biliary Stent Application”, Journal of Applied Polymer Science, 97, 893-902 (2005)

  42. Li-Fen Wang, Yu-Hong Wei, Kuo-Yu Chen, Jui-Che Lin, Jen-Feng Kuo, “Properties of Phospholipid Monolayer Deposited on a Fluorinated Polyurethane”, Journal of Biomaterials Science: Polymer Edition, 15, 957-969 (2004)

  43. Mei-Chuan Peng, Jui-Che Lin, Chiung-Yu Chen, Jiunn-Jong Wu, Xi-Zhang Lin, “Studies of Sulfonated Polyethylene for Biliary Stent Application”, Journal of Applied Polymer Science, 92, 2450-2457 (2004)

  44. Hong-Ming Tsai, Xi-Zhang Lin, Chiung-Yu Chen, Pin-Wen Lin, and Jui-Che Lin, “Magnetic Resonance Imaging of Gallstones with Different Compositions”, American Journal of Roentgenology AJR, 182, 1513-1519 (2004)

  45. J.-C. Tsai, Y.-L. Lo, C.-Y. Lin, H.-M. Sheu, and Jui-Che Lin, “Feasibility of Rapid Quantitation of Stratum Corneum Lipids by Fourier Transform Infrared Spectrometric Analysis”, Spectroscopy An International Journal, 18, 423-431 (2004)

  46. Chia-Wen Lin, Jui-Che Lin, “Characterization and Blood Coagulation for The Water-Soluble Chitooligosaccharides Prepared by a Facile Fraction Method”, Biomacromolecules, 4, 1691-1697 (2003)

  47. H.-H. Pan, M.-C. Peng, Jui-Che Lin, C.-Y. Chen, J.-J. Wu, X.-Z. Lin, “Studies of Ionic Polyurethanes for Biliary Stent Applications”, in Advances in Biomaterials and Drug Delivery System, Ging-Ho Hsiue, Teruo Okano, Un Young Kim, Hsing-Wen Sung, Nobuhiko Yui and Ki Dong Park Eds. Princeton International Publishing Co. Ltd. Taipei, Taiwan 301-312, 2002

  48. Huai-Song Han, Shiao-Ling Yang, Hsi-Yi Yeh, Jui-Che Lin, Hua-Lin Wu, Guey-Yueh Shi, “Studies of a Novel Human Thrombomodulin Immobilized Substrate: Surface Characterization and Anticoagulation Activity Evaluation”, Journal of Biomaterials Science: Polymer Edition, 12, 1075-1089 (2001)

  49. Meng-Yen Tsai and Jui-Che Lin, “Preconditioning Gold Substrates Influence Organothiol Self-Assembled Monolayer (SAM) Formation”, Journal of Colloid and Interface Science, 238, 259-266 (2001)

  50. Chia-Wen Lin and Jui-Che Lin, “Surface Characterization and Platelet Compatibility Evaluation of Surface Sulfonated Chitosan Membrane”, Journal of Biomaterials Science: Polymer Edition, 12, 543-557 (2001)

  51. Meng-Yen Tsai and Jui-Che Lin, “Surface Characterization and Platelet Adhesion Studies for the Self-Assembled Monolayer (SAM) with Phosphonate Ester and Phosphonic Acid Functionalities”, Journal of Biomedical Materials Research, 55, 554-565 (2001)

  52. Jui-Che Lin, Chia-Wen Lin, and Xi-Zhang Lin, “In Vitro and In Vivo Studies for the Modified Ethyl Cyanoacrylate Regimens for Sclerotherapy”, Journal of Biomedical Materials Research: Applied Biomaterials, 53, 799-805 (2000)

  53. Chung-Min Jen, Jui-Che Lin, Shih-Chin Lee, Hong-Min Tsai and Xi-Zhang Lin, “Expandable Metallic Esophageal Stent: Preliminary Report of a Lab-built Process, In Vitro Expansile Stiffness Test, and In Vivo Placement in a Pig”, Gastroenterology Journal Taiwan, 17, 16-25 (2000)

  54. Jui-Che Lin and Shang-Ming Tseng, “Surface Characterization and Platelet Adhesion Studies on Polyethylene Surface with Hirudin Immobilization”, Journal of Materials Science: Materials in Medicine, 12, 827-832 (2001)

  55. Jui-Che Lin, Sun-Lee Tiong and Chuh-Yung Chen, “Surface Characterization and Platelet Adhesion Studies of Plasma Induced Graft Polymerization of Fluorocarbons”, Journal of Biomaterials Science: Polymer Edition, 11, 701-714 (2000)

  56. Jui-Che Lin and Wen-Hsi Chuang, “Synthesis, Surface Characterization and Platelet Reactivity Evaluation for the Self-Assembled Monolayer of Alkanethiol with Sulfonic Acid Functionality”, Journal of Biomedical Materials Research, 51, 413-423 (2000)

  57. Jui-Che Lin and Chi-Hau Wu, “Surface Characterization And Platelet Adhesion Studies on Polyurethane Surface Immobilized with C60”, Biomaterials, 20, 1613-1620 (1999)

  58. Jui-Che Lin, Yui-Fang Chen and Chih-Yung Chen, “Surface Characterization and Platelet Adhesion Studies of Plasma Polymerized Phosphite and Its Copolymers with Dimethylsulfate”, Biomaterials, 20, 1439-1447 (1999)

Research

Biomaterials, Biomedical Engineering, Surface Modifcation, Self-Assembled Monolayers, Biomacrolecules/Biomaterials Interfacial Phenomena

back